Joystick and rotary button

There are controls fixed on the central dashboard in the dashboard and are used to send all the electrical impulses that will then carry out the most varied operations provided for depending on the tail lift model and equipment. Joysticks can be 2 or 4 functions, and one side may have one or two. Often each manufacturer adopts its own specific solution and therefore it is unlikely that one will fit all. Selectors, on the other hand, are levers that rotate on a central axis, which can work in different positions depending on where you rotate the lever with your fingers. The most common are 2 or 3 positions. In some cases, turning the selector remains locked in the position although it is not held, in others, as soon as you let go of it, the lever returns to the center deactivating the electrical signal. So, in this regard, please read the indications we have written in the notes, because the symbols indicated in the description of the object may not be immediately clear. To give an example: I-0-II indicates that the selector if it is turned to the right remains locked in that position, while turning the lever to the left, as soon as it is released, it automatically returns to the center. Finally, the buttons are usually round elements whose central part moves backwards if pressed, closing an electrical contact. When the pressure ends, a spring pushes it outwards, deactivating the contact. All these elements, joystrick, selectors and buttons, at the rear are equipped with contacts that can be multiple and of different types. Contacts NO: normally open or NC: normally closed.